Tips Pkg
Focaccia Bread – The Perfect Fancy Sandwich And Traditional Appetizer
Focaccia bread is a staple in classic Italian meals. It is best enjoyed with olives, herbs, tomatoes (sun-dried) and cheese. You could also eat it by itself as a meal or as an appetizer. Focaccia bread is made from basic bread dough used in making pizza crusts. It is said to have originated from the time of the Etruscans from North Italy. Some believe that Focaccia originated in Ancient Greece, during the beginning of the first millennium before Christ. The word Focaccia itself is a direct derivation from the Roman term panis focacius. The recipe for Focaccia bread has spread to other regions, including the Middle East.
The practice of dipping Focaccia into soups and vinegar started during the Roman times. At that time, it proved to be a cheap but filling meal for most people. At present, Focaccia bread has its own dip made out of vinegar and is usually served as appetizer. The difference lies in its preparation. The dough transforms into Focaccia bread after adding toppings. Also, you could make your homemade Focaccia bread according to your tastes and preferences. You are free to add little bits of herbs and cheese for that light flavor. However, you might want to add more toppings if you're wanting something more fully-flavored.
Here are the ingredients that you will need to create the basic dough:
1 tbsp/1 pkg of active dry yeast
1 tbsp of sugar
1- 1/3 c of water (hot)
2 tbsps of olive oil
3-1/2 - 4 c of flour (all-purpo
se) 2 tsps of salt
For the toppings, you'll need the following:
1/2 c of olive oil Tomatoes (sun-dried),
sliced Olives or onions (caramelized)
2 tbsps of cheese (either Parmesan, Romano or Asiago); grated
1/4 tsp of salt (coarse)
2 tsps of fresh herbs or 1 tsp of dried herbs, either thyme, rosemary, oregano, basil or dill
Create your bread dough by dissolving yeast with hot water. Let stand for five minutes. Mix together all your ingredients for your bread dough inside a big bowl. Stir the ingredients together until the mixture becomes stiff and sticky. Flatten the mixture into a flat & floured board/surface then knead steadily for ten minutes. Cut dough into half then shape each dough piece to a roll measuring 1/2 inch thick.
Put the pieces into well-oiled cake pans and cover with plastic/serran wrap. Let dough rise for an hour and thirty minutes. Preheat the oven up to about 400 deg. Fahrenheit. When your dough doubles in size, press firmly into cake pans and create indentations throughout your risen dough. Put the ½ cup of olive oil lightly into your dough. Then, add in your toppings afterwards. Place dough into the oven and bake it for around 25-30 minutes. Make sure that your dough turns golden & brown. After baking, take bread out & let cool before serving.
About the Author
Mary loves cooking! You can check out her very popular Bread
Recipes website where she shares some of her Rye
Bread Recipes and Sweet
Bread Recipes
GAS TIPS PKG FAMU TV 20
|
|
Thermal Dynamics 8-7515 Tip. Pkg=10 $71.17 |
|
|
Thermal Dynamics 9-4476 Tip Pkg = 10 $68.67 |
|
|
Thermal Dynamics 9-6501 Tip Pkg = 10 $68.67 |
|
|
Miller 212727 Tip,Gouge Ice- (80T/Cx) 80Amp Pkg = 5 $56.25 |
|
|
Miller 219680 Tip,Gouge Ice- 60T,80T/Cx, 60Amp Pkg = 5 $55.50 |
|
|
THERMAL DYNAMICS PLASMA tips 9-6501 PKG/10 $54.50 |
|
|
THERMAL DYNAMICS PLASMA CUTTING TIP 9-4476 PKG/10 $54.50 |
|
|
THERMAL DYNAMICS 9-6099 PLASMA TIPS 10/PKG $53.00 |
|
|
Koike cutting tips 103-D7-0 pkg of 5 $50.00 |
|
|
Miller 192204 Tip,Gouge Ice- 55C Pkg = 5 $45.00 |
|
|
Tweco 1160-1183 16RZ-52 .052" Contact Tips Copper Zirconium Chrome - Pkg of 25 $44.79 |
|
|
Miller 204332 Tip,Gouge Ice- 40C/40T Pkg = 5 $43.42 |
|
|
Thermal Dynamics 9-8252 Tip, 60A, Drag Pkg = 5 $42.45 |
|
|
ESAB 0558005219 Pointed 70Amp Tip for PT-38 Plasma Torch Pkg. 5 $40.27 |
|
|
Miller 212729 Tip,Extended Ice- (80T/Cx) 40Amp Pkg = 5 $40.09 |
|
|
Miller 219676 Tip,Ice- 60T/Tm,80T/Tm/Cx, 60Amp Pkg = 5 $39.91 |
|
|
Thermal Dynamics 9-8225 Gouging Tip A Pkg = 5 $39.64 |
|
|
Miller 212725 Tip,Ice- (60T/Tm)(80T/Tm/Cx) 40Amp Pkg = 5 $39.64 |
|
|
Miller 212728 Tip,Extended Ice- (80T/Cx) 80Amp Pkg = 5 $38.91 |
|
|
Miller 212726 Tip,Ice- (80T/Tm/Cx)(100T)80Amp Pkg = 5 $38.91 |
|
|
Thermal Dynamics 8-7514 Tip PKG = 5 $38.82 |
|
|
ESAB 0558007680 Pointed 90Amp Tip for PT-38 Plasma Torch Pkg. 5 $37.09 |
|
|
ESAB 0558008417 Pointed 60Amp Tip for PT-38 Plasma Torch Pkg. 5 $37.09 |
|
|
Miller 225671 Tip,Ice- 27C/27T 25Amp Pkg = 5 $36.18 |
|
|
MILLER SPECTRUM PLASMA GOUGING TIP 204332 PKG/5 $35.25 |
|
|
THERMAL DYNAMICS TIP #9-8253 PKG. OF 5 PLASMA $34.99 |
|
|
THERMAL DYNAMICS PLASMA TIPS 60A 9-8252 5/PKG $34.65 |
|
|
Thermal Dynamics 9-5631 Tip Pkg = 5 $33.64 |
|
|
Lincoln Plasma Tip S18497-3D .052 orifice KP2008-3B1 Pkg of 10 Tips $106 PCT-60 $32.99 |
|
|
Miller 206186 Tip,Fastip .312 Od .035 .030Al Pkg = 25 $32.75 |
|
|
Miller 206187 Tip,Fastip .312 Od .040 .035Al Pkg = 25 $32.75 |
|
|
Miller 206189 Tip,Fastip .312 Od .052 3/64Al Pkg = 25 $32.73 |
|
|
Miller 206188 Tip,Fastip .312 Od .045 .040Al Pkg = 25 $32.73 |
|
|
Thermal Dynamics 9-8231 TIP, 70A Pkg = 5 $32.36 |
|
|
Thermal Dynamics 9-8212 Tip 90-100A Pkg= 5 $32.36 |
|
|
Thermal Dynamics 9-8205 TIP, 20A, DRAG Pkg = 5 $32.36 |
|
|
Thermal Dynamics 9-8207 40 Amp Drag Tip 1Torch Pkg=5 $32.36 |
|
|
Thermal Dynamics 9-8209 50-55A Tip Pkg = 5 $32.36 |
|
|
Thermal Dynamics 9-8208 TIP, 40A, MECH Pkg=5 $32.36 |
|
|
Thermal Dynamics 9-8206 30 Amp Drag Tip 1Torch Pkg=5 $32.35 |
|
|
Thermal Dynamics 9-8210 Tips For 1Torch Pkg=5 $32.35 |
|
|
Tweco 1140-1432 14RZ-45 Contact Tips .045" Copper Zirconium Chrome - Pkg of 25 $31.79 |
|
|
Miller 196926 Tip,Ice- 12C 12Amp Pkg = 5 $31.55 |
|
|
MILLER SPECTRUM PLASMA CUTTING TIP EXT. 212729 PKG/5 $30.70 |
|
|
THERMAL DYNAMICS PLASMA GOUGING TIP 9-8225 PKG/5 $30.50 |
|
|
MILLER SPECTRUM PLASMA CUTTING TIP 40AMP 212725 PKG/5 $30.30 |
|
|
MILLER SPECTRUM PLASMA CUTTING TIP 219676 PKG/5 $30.15 |
|
|
Tweco 1150-1283 WS15H-332 WeldSkill Contact Tips 3/32" Copper Alloy - Pkg of 25 $28.79 |
|
|
Miller 192056 Tip,Extended Ice- 55C 55Amp Pkg = 5 $28.09 |
|
|
Miller 192052 Tip,Ext Ice- 40C/40T/55C 40Amp Pkg = 5 $27.82 |
|
|
MILLER SPECTRUM PLASMA DRAG TIP 25A PKG/5 225671 $27.55 |
|
|
THERMAL DYNAMICS PLASMA TIP 60A 9-8210 PKG/5 $25.25 |
|
|
THERMAL DYNAMICS PLASMA TIPS 30A 9-8206 5/PKG $25.25 |
|
|
THERMAL DYNAMICS PLASMA TIP 80A 9-8211 PKG/5 $25.25 |
|
|
THERMAL DYNAMICS PLASMA 40A TIP 9-8207 PKG/5 $25.25 |
|
|
THERMAL DYNAMICS PLASMA 40A TIP 9-8208 PKG/5 $25.25 |
|
|
THERMAL DYNAMICS PLASMA TIP 90A/100A 9-8212 5/PKG $25.25 |
|
|
Tweco 1160-1104 16S-45 Professional Contact Tips .045" Copper Alloy - Pkg of 25 $24.79 |
|
|
Miller 169716 Adapter,Contact Tip (M-10/15) Pkg = 2 $24.40 |
|
|
MILLER SPECTRUM PLASMA TIP 196926 PKG/5 $24.35 |
|
|
THERMAL DYNAMICS PLASMA TIPS 20A 9-8205 5/PKG $24.00 |
|
|
Miller 204325 Tip,Ice- 40C/T 40Amp Pkg = 5 $23.73 |
|
|
MILLER SPECTRUM PLASMA Ext. tip ice-50c PKG/5 177876 $22.60 |
|
|
MILLER SPECTRUM PLASMA tip ice-55c 55A PKG/5 192056 $22.15 |
|
|
new! PKG of 5 MILLER 212728 TIP, EXTENDED ICE 80 AMP 80T/CX 100T $21.60 |
|
|
Miller 192051 Tip,Ice- 55C 55Amp Pkg = 5 $20.75 |
|
|
Tweco WS16S-116 Weldskill Contact Tip 1160-1428 pkg=25 $19.99 |
|
|
MILLER 169716 TIP ADAPTOR PKG/2 $19.38 |
|
|
Miller 176656 Tip,27 Amp Ice-25C/27C/27T Pkg = 5 $19.20 |
|
|
TWECO 14-23 ..023/25 CONTACT TIPS PKG/25 $19.00 |
|
|
Thermal Dynamics® Tip, 80 Amp (pkg of 5) No. 9-8211 $18.99 |
|
|
Thermal Dynamics® Tip, 40 Amp No. 9-8207 (pkg of 5) $18.99 |
|
|
MILLER SPECTRUM PLASMA STANDARD TIPS 204325 PKG/5 $18.95 |
|
|
Thermal Dynamics Cutmaster 42 40 Amp Drag Tip 9-0093 Pkg = 5 $18.73 |
|
|
Thermal Dynamics Cutmaster 42 20 Amp Tip 9-0091 Pkg = 5 $18.73 |